Used Cushion Tire Forklift Hawaii - While forklift trucks are often classified by the type of work they perform under most circumstances, forklift trucks can also be classified by the type of tire they are fitted with. The two types of tire classification for forklifts are:
1. Cushion; and
2. Pneumatic.
It is vital to note that there are benefits and drawbacks to both types of forklift tires; cushion and pneumatic. The cushion tire benefits and drawbacks can only be understood in the context of what the pneumatic tire offers in terms of forklift operation.
Forklift Tire Classifications
Cushion Tires
Cushion tires feature solid rubber that is either smooth or treaded and fixed or positioned around a baseband or metal ring. These kinds of forklift tires are cheaper to make and easier to maintain. Cushion tires have been designed to work on smooth surfaces such as interior loading docks and warehouse floors. Cushion tires make travelling in tight locations much easier to navigate around corners due to their tight radius. Cushion tires enable the forklift to be situated closer to the ground, increasing the vertical clearance in comparison to other models that rely on pneumatic tires. Pneumatic tires provide better traction compared to cushion tires; especially on wet surfaces and outdoor locations.
Cushion tire forklifts are used for a wide range of applications, including order picking, unloading shipments, organizing inventory, transporting to and from a loading dock and other similar applications.
Pneumatic Tires
Pneumatic tires are mainly utilized on uneven surfaces and rougher terrain. These tires fall into two categories: standard air pneumatic or solid resilient pneumatic.
The main difference with these categories is that the standard air pneumatic tires consist of a layered rubber design filled with air and the solid resilient pneumatic type is made completely out of rubber.
Pneumatic tire forklifts are good options for work that takes place outdoors on unpaved ground. Locations that have sharp debris or objects that could puncture a standard air pneumatic tires such as junkyards or lumber yards will benefit from solid resilient pneumatic forklift tires.
Benefits of Cushion Tire Forklifts
Cushion tire forklifts can be used inside and outside on smooth surfaces. The forklift designed for use with cushion tires, is intended to be used mostly indoors, with some limited outdoor use. They are often designed for use in areas such as manufacturing plants and warehouses. Warehousing and narrow aisles and tight locations all rely on the benefits of cushion tire forklifts.
Some benefits of using a cushion tire forklift over a pneumatic tire forklift are:
1) Maneuverability
Maneuverability is one of the key pneumatic tire forklift benefits since these models do not require a larger frame to facilitate a bigger internal combustion engine.
2) Lower Clearance
Forklifts built for indoor use with cushion tires generally have a lower clearance than pneumatic tire equipment, allowing the forklift to more easily navigate doorways and other obstacles such as lights and sprinkler systems.
3) Durability
With little to no risk of a tire puncture, cushion forklift models are easy to maintain and ultra-durable.
4) Quiet
Because the majority of cushion tire forklifts are powered by battery or fuel cell, instead of an internal combustion engine, they are much less noisy than propane or diesel powered forklifts.
5) Environmentally Friendly
Again, because most cushion tire forklifts are powered by electricity, rather than an internal combustion engine, cushion tire forklifts produce no harmful emissions.
Forklift Tire Choice
The majority of forklift frames specify either a pneumatic tire or a cushion tire. Axles and tires are specific to a forklift frame and lifting capacity. Forklift manufacturers create models that safely operate with certain tires and wheels, typically pneumatic tires or cushion tires. Because of this, it is more useful to choose the best forklift type, considering the type of tires the forklift will require and how it fits the job application, rather than attempting to modify the forklift by choosing the right tire for the application.
Workplace Applications
Suitable Work Applications for Cushion Tires
Cushion tire forklifts are usually the best option for many workplace applications. If the majority of the load lifting, transporting and placing will occur indoors or with only moderate outdoor usage on smooth surfaces, then cushion tires are likely the best option.
Forklifts fitted with cushion tires often have a smaller frame and sit much lower to the ground than forklifts fitted with pneumatic tires. Cushion tire models can fit through doorways easier and avoid overhead obstacles. However, cushion tire forklifts also have less clearance to the ground which can result in cushion tire forklifts getting easily hung up on outdoor obstacles where the surface is not cleared or even. One solution to this problem is to fit the cushion tire forklift with traction tires on the front of their forklifts. Traction based tires will function in rough terrain environments that have wet surfaces, packed gravel and asphalt. However, it is still not recommended to drive on dirt or grass and it must be noted that the same type of tire must be used on the opposite sides, drive and steer axles.
One of the largest advantages of using a forklift with cushion tires is the smaller turning radius. This makes cushion tire forklifts ideal for warehouses and manufacturing facilities that have less space. Areas that are designed with narrow aisles such as warehouse facilities will enjoy the tighter turning radius offered with cushion tire forklift models. Cushion tire forklifts are also less expensive and are more readily available than pneumatic tire forklifts.
Suitable Work Applications for Pneumatic Tire Forklifts
Outdoor applications working on gravel benefit from pneumatic tire forklift models thanks to the air in their tires. Interior applications may use pneumatic tire forklift models although they will not provide the maneuverability, lower clearance or tighter turning radius. Of course, they are often powered by internal combustion engine so do produce harmful emissions which are not recommended for normal indoor use. Measuring wider and longer in comparison to cushion tire forklifts, pneumatic tire models are mostly utilized outside.
Of the two types of pneumatic tires, the solid pneumatic tire is more expensive than the air pneumatic tire. The solid pneumatic tire is comprised of solid rubber without any air inside, making this type more resilient against gouges or punctures. These solid pneumatic tires are best for scrap yards and lumber yards where the possibility of running over sharp metal scrap and debris, such as nails, in greatly increased. Similar to solid pneumatics, air pneumatics work well outdoors on asphalt, in gravel and in yards. Air-filled pneumatic tires can easily become punctured and their working environment needs to be evaluated carefully. Due to their susceptibility for getting gouged or punctured, the work location must be free from sharp debris before driving the air pneumatic tires. Air tires are also known to give a bouncy ride, contributing to operator discomfort and fatigue. Due to this, numerous air pneumatic forklift users fill foam in their tires. The foam filling option creates a more even ride compared to the solid pneumatic tires or the bounciness of the air-filled pneumatic tires. Flat tires can be filled with foam to keep them more durable and prevent flats. It takes roughly three days to fill and cure an air pneumatic tire with foam.
Difference in Load Capacity
The load capacity on for pneumatic tire forklifts and cushion tire forklifts are fairly equal. Lift limits are given for certain electric-powered cushion tire forklifts. There are numerous forklifts available and a variety of pneumatic and cushion tire models can be found in a variety of load capacities. There are numerous load capacities ranging from less than 2000 pounds to more than 200,000 pounds.
Cushion Tire Forklift PDF
